DIY: Raspberry Pi Controlled Scissor Lift

Robotic Gizmos

There is no better way to learn electronics and robotics than building and programming your own robots. BIMThoughts has put together a guide that shows you how to build your own Raspberry Pi controlled scissor lift. It relies on the PI unit to turn on the LX-16A servo to raise and lower the lift. The code is written in Python.

You are going to need 4 AA batteries to power the servo. More information about this project here.

The post DIY: Raspberry Pi Controlled Scissor Lift appeared first on Robotic Gizmos.


Source: roboticgizmos

Leave a Reply