ACEINNA announces ±65Amp current sensor

The Robot Report
The New Aceinna Sensor

ACEINNA’s ±65 Amp sensor. | Photo Credit: ACEINNA

ACEINNA introduced the high current ±65 Amp MCx1101 current sensor. The sensor is designed for wideband gap applications, and available in 3.3- and 5-Volt versions.

The wideband gap (WBG) Anisotropic Magnetoresistive-based (AMR) current sensor is created for a wide range of next generation power systems and applications. Units are now available for sampling and volume shipments.

The MCx11-1’s fast response and high bandwidth is ideal for fast switching SiC and GaN based power stages and enables power system designers to make use of the higher speeds and smaller components enabled by wide band-gap switches. Output step response time is just 0.3us. The MCx1101 also provides an integrated over current detection flag to help implement the Over Current Detection (OCD) required in modern power systems. Over current detection response time is a fast 0.2us.

“ACEINNA’s MCx1101 current sensors are fully integrated, bi-directional and provide much higher DC and AC accuracy and dynamic range compared with alternative solutions,” says Teoman Ustun, VP of Marketing, ACEINNA. “For example, the new ±65 Amp versions have a typical accuracy of ±3%. This new current sensor utilizes an industry standard SOIC-16 package with a low impedance (0.9 milli-ohm) current path and are UL/IEC/EN60950-1 certified for isolated applications.”

This new current sensor delivers a combination of high accuracy, 1.5MHz signal bandwidth with industry benchmark phase shift vs. frequency, fast output step response and 4.8kV isolation. This makes them ideal for current sensing in fast current control loops and protection for high performance power supplies, inverters and motor control applications.

In addition to the new ±65 Amp version, ACEINNA’s current sensor family includes ±50, ±20, and ±5 Amp ranges, and is offered in both fixed gain (MCA1101) and ratiometric gain (MCR1101) versions.

The post ACEINNA announces ±65Amp current sensor appeared first on The Robot Report.


Source: therobotreport

Leave a Reply